Add-on Air Kits

This kit is designed to allow air bags, air cylinders, and air struts to be inflated from an outside air source such as a shop or gas station air compressor. This kit comes with everything need to inflate all four corners separately. This kit can be used a an emergency backup or as a starter kit.

4 - Inflation valves
4 - 3/8in NPT to 1/4in Line Elbow
10 feet of 1/4in air line

Manufacturer: Various

KMW Performance Part #: 1000ADD

$60.00
USD Add to Cart

This kit is designed to allow air bags, air cylinders, and air struts to be inflated from an outside air source such as a shop or gas station air compressor. This kit comes with everything need to inflate either the front or the rear separately. You will need 1 kit for the front and 1 kit for the rear. This kit can be used a an emergency backup or as a starter kit.

1 - Inflation valve
2 - 3/8in NPT to 1/4in Line Elbow
1 - 1/4in Line Tee Fitting
5 feet of 1/4in air line


KMW Performance Part #: 1001ADD

$25.00
USD Add to Cart

Our most economical package. Use one path for front and one for rear, or two paths can be used for side-to-side control when air springs are installed on just the front or rear of the vehicle. Additional paths can always be added later. This kit is rated: GOOD.

1 - Viair 450C Chrome Compressor
1 - Pressure Switch 110-145PSI
1 - Air Lift 5 Gallon, 8-Port Tank
4 - Air Lift 3/8" Chrome 300PSI Electric Valve
1 - Dual Electric Gauge Panel with one 200PSI Gauge
3 - Fuse Holders with Cover
3 - 15 AMP Spade Fuse
6 - 30 AMP Spade Fuse
1 - 40 AMP Heavy Duty Relay
1 - Single Relay Socket
50ft of 1/2" DOT Synflex Air Line
50ft of 1/4" DOT Synflex Air Line
1 - Thread Sealant Packet
1 - Air Line Cutter
1 - 1/2" Street Tee Fitting
2 - 1/2" NPT to 1/4" FEM Bushing Fitting
2 - 1/2" NPT to 1/8" Bushing Fitting
1 - Drain Cock Fitting
1 - Inflation Valve Fitting
3 - 1/2" NPT Hex Plug
2 - 1/2" NPT to 3/8" FEM Bushing Fitting
2 - 3/8" Street Tee Fitting
4 - 3/8" NPT to 3/8" NPT Straight Fitting
2 - 3/8" NPT to 1/2" Line Elbow Fitting
2 - 1/2" Line Tee Fitting
2 - 1/4" NPT to 1/2" Line to 1/2" Line Tee Fitting
2 - 1/4" FEM to 1/4" Line Straight Fitting

Check out the air kit upgrades section at the left for upgrades and additional items.


KMW Performance Part #: 2WAYAIRKITADD

$690.00
USD Add to Cart

This system is designed for better handling. Each front air spring has a separate path to control "steering dive". As the vehicle enters a turn the weight is shifted to the outside front corner. The air spring should build spring rate under compression to control weight shift. If the front air springs are teed together, the air pressure will transfer to the low pressure side rather than build spring rate, resulting in a push condition. Using the 3-Path system prevents steering-dive by eliminating air transfer between the front air springs. The rear air springs can be teed together, unless the vehicle is unevenly loaded. This kit is rated: BETTER.

1 - Viair 450C Chrome Compressor
1 - Pressure Switch 110-145PSI
1 - Air Lift 5 Gallon, 8-Port Tank
6 - Air Lift 3/8" Chrome 300PSI Electric Valve
1 - Dual Needle Gauge 200PSI
1 - Single Needle Gauge 200PSI
3 - Rocker Switches
3 - Fuse Holders with Cover
3 - 15 AMP Spade Fuse
6 - 30 AMP Spade Fuse
1 - 40 AMP Heavy Duty Relay
1 - Single Relay Socket
50ft of 1/2" DOT Synflex Air Line
50ft of 1/4" DOT Synflex Air Line
2 - Thread Sealant Packet
1 - Air Line Cutter
1 - 1/2" Street Tee Fitting
2 - 1/2" NPT to 1/4" FEM Bushing Fitting
2 - 1/2" NPT to 1/8" FEM Bushing Fitting
1 - Drain Cock Fitting
1 - Inflation Valve Fitting
2 - 1/2" NPT Hex Plug
3 - 1/2" NPT to 3/8" FEM Bushing Fitting
3 - 3/8" Street Tee Fitting
6 - 3/8" NPT to 3/8" NPT Straight Fitting
3 - 3/8" NPT to 1/2" Line Elbow Fitting
1 - 1/2" Line Tee Fitting
3 - 1/4" NPT to 1/2" Line to 1/2" Line Tee Fitting
3 - 1/4" FEM to 1/4" Line Straight Fitting

Check out the air kit upgrades section at the left for upgrades and additional items.

Manufacturer: Air Lift

KMW Performance Part #: 3WAYAIRKITADD

$863.00
USD Add to Cart

Each air spring has a separate air line. This four corner system provides maximum versatility for clowning or weight control. The vehicle can be leveled side-to-side or front-to-rear. This kit is rated: BEST.

1 - Viair 450C Chrome Compressor
1 - Pressure Switch 110-145PSI
1 - Air Lift 5 Gallon, 8-Port Tank
8 - Air Lift 3/8" Chrome 300PSI Electric Valve
2 - Dual Needle Gauge 200PSI
4 - Rocker Switches
3 - Fuse Holders with Cover
3 - 15 AMP Spade Fuse
6 - 30 AMP Spade Fuse
1 - 40 AMP Heavy Duty Relay
1 - Single Relay Socket
50ft of 1/2" DOT Synflex Air Line
50ft of 1/4" DOT Synflex Air Line
2 - Thread Sealant Packet
1 - Air Line Cutter
1 - 1/2" Street Tee Fitting
2 - 1/2" NPT to 1/4" FEM Bushing Fitting
2 - 1/2" NPT to 1/8" FEM Bushing Fitting
1 - Drain Cock Fitting
1 - Inflation Valve Fitting
1 - 1/2" NPT Hex Plug Fitting
4 - 1/2" NPT to 3/8" FEM Bushing Fitting
4 - 3/8" Street Tee Fitting
8 - 3/8" NPT to 3/8" NPT Straight Fitting
4 - 3/8" NPT to 1/2" Line Elbow Fitting
4 - 1/4" NPT to 1/2" Line to 1/2" Line Tee Fitting
4 - 1/4" FEM to 1/4" Line Straight Fitting

Check out the air kit upgrades section at the left for upgrades and additional items.


KMW Performance Part #: 4WAYAIRKITADD

$949.00
USD Add to Cart

Air Management System for Sport Compacts
1-Air Lift 380C Compressor
1-5 Gallon, 8-Port Tank
4-Electric Switchs
8-300psi Airlift Electric Valves
2-200psi Dual Needle Gauges
1-175psi Pressure Switch
Electrical Wiring & Connectors
1/2" DOT Air Line & Fittings
Hose Cutter
Installation Manual

Manufacturer: Air Lift

KMW Performance Part #: AL27741

$1,018.00
USD Add to Cart