Air Bags

Single Convoluted Air Spring.

Designed for Front & Rear Suspension on Mini Trucks, Hot Rods and Most Sport Cars.

2.0" Compressed
7.0" Extended
5.875" Diameter

Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber.

MADE IN THE USA!

Single Convoluted Air Spring.

Designed for Front & Rear Suspension on Mini Trucks, Hot Rods and Most Sport Cars.

1/2in NPT
2.0in Compressed
8.5in Extended
5.875in Diameter

Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber.

MADE IN THE USA!

Large Double Convoluted Air Spring.

Designed for Rear Suspension on Trucks, Light/Heavy Duty, and Subframe Vehicles who are looking for EXTREME LIFT!

3.25" Compressed
13.0" Extended
7.0" Diameter

Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber.

MADE IN THE USA!

Triple Convoluted Air Spring.

Designed for Rear Suspension on Mini Trucks, Light Duty, and Subframe Vehicles

4.5" Compressed
15.75" Extended
5.875" Diameter

Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber.

MADE IN THE USA!

Single Convoluted Air Spring.

Designed for to slip over your Factory/Performance Struts. (Pressure tube must be less then 2.14 in Diameter)

4.0" Compressed
9.25" Extended
5.875" Diameter

Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber.

Available in 1/4 NPT Ports

MADE IN THE USA!

NOTE: The brackets required to install these bags are 2 Flat Plates (Upper and Lower), Bearing Kit (You also can use your factor bearing plate for this application). Using the bearing supplied in the kit will allow you to achive an additional 1" Drop.

Applications Include:
04+ F-150 Front Suspension
Ford Expedition Front and Rear
Charger, 300C, Magnum
Scion
Lexus

Please Click here to view Application Guide

Diameter "0" PSI: 7"
Diameter Max PSI: 7"
Max PSI: 600
Plate Material: Zinc/Aluminum
Min Height: 2.9"
Max Height: 11"
Mounting (top): (2) 3/8" - 16
Mounting (bottom): (3) 3/8" - 16
Air Port NPT: (2) 1/2"
Internal Bump Stops: Yes
Force to Collapse: 300lbs

Spec Sheet